Current position >About Us
1. Ultrasonic flowmeter
2. Are there any requirements for the insertion depth when installing the Cologne ultrasonic flowmeter?
There are clear requirements for the insertion depth of the probe when installing the Cologne ultrasonic flowmeter, and it must be strictly operated according to the specifications. 1 The determination of insertion depth is mainly determined by the diameter of the pipeline, and the larger the diameter, the deeper the insertion depth. Small pipe diameters (such as below DN100) are usually inserted by a few centimeters, while large pipe diameters (such as above DN1000) may need to be inserted by more than ten centimeters or even deeper.
2. Core installation requires that the probe must reach a stable flow velocity area near the center of the pipeline to ensure that the average fluid flow velocity is captured. Insertion too shallow or too deep can cause measurement errors and even damage to the sensor. 3. Specific operating specifications vary depending on the insertion depth of different models, and the installation manual provided by the manufacturer must be strictly followed. Cologne will provide specific insertion depth values, calculation formulas, or installation positioning templates for each model. Special tools should be used for accurate positioning during installation, and signal strength and quality indicators should be used to verify whether the installation position is qualified after installation.
3. What are the normal values of Q and T for ultrasonic flow meters?
The normal range of Q value for ultrasonic flow meters is: the minimum working threshold is ≥ 50, and the ideal working range is 600-900. The higher the value, the better the signal quality and measurement accuracy.
. 1. Normal range of Q value (signal quality indicator): • Minimum operating threshold: ≥ 50.0 (below which the flow meter cannot measure normally) • Ideal operating range: 600-900 (at this time, the signal-to-noise ratio is high, and the measurement data is stable and accurate) • Optimization direction: The higher the value, the better the signal quality. The Q value can be improved by adjusting the sensor installation position, improving the pipeline surface treatment, or optimizing the use of coupling agents. 2. T value (time measurement parameter) Currently, the specific normal range of T value for ultrasonic flow meters has not been clearly standardized in public information. The T-value is usually related to sound wave transmission time, time difference, or temperature compensation, but its specific meaning and threshold need to be determined according to the specific equipment model and manufacturers technical manual. It is recommended to directly consult the equipment manual or contact the manufacturer for targeted parameter standards.4. What are the top ten brands of ultrasonic flow meters?
What are the top ten brands of ultrasonic flow meters you asked about? Let me help you sort them out. At present, mainstream brands are mainly divided into two categories: international giants and domestic leading enterprises, each with their own focus, and there is no absolute first place. The key depends on your specific application scenarios. 1. Emerson: an American brand with the authoritative Rosemount differential pressure/vortex product line in the energy industry, leading the global high-end market for high-precision Coriolis flow meters, The SITRANS series is sui