Company Profile

Coriolis Meter Units: Premium Inertial Fluid Equipment for High-Accuracy Batching

Quick Answer: Coriolis meter units from Silver Automation Instruments deliver direct mass flow measurement for batching systems. They handle non-conductive fluids, viscous products, and changing process conditions. Typical batch accuracy is ±0.1% to ±0.2% of rate. In practice, this is premium inertial fluid equipment for high-accuracy batching, and the units often pay for themselves by cutting waste and rework.

What Makes These Coriolis Meter Units Different

Silver Instruments builds Coriolis meter units with no moving parts in the flow path. The meter tubes vibrate at a known frequency. Fluid mass passes through the tubes and creates a phase shift. This shift maps directly to mass flow. Because the measurement is direct mass, you do not need separate temperature and pressure compensation for many fluids.

Most engineers skip the old volumetric conversion step. A paint producer in Vietnam switched from turbine meters to Silver Coriolis meters for resin batches. The plant cut overfill waste by 400 kg per month. This is the kind of detail we hear from customer sites.

Inertial Fluid Equipment Means Stable Batching

Inertial fluid equipment sounds like a lab term. In practice it means the measurement output stays stable when density and viscosity shift. For a chemical plant in Thailand running polyol at 800 cP, a standard meter can drift. Our Coriolis units keep the batch cycle tight.

A demin water line at 2 µS/cm also works well. There is no minimum conductivity floor because the meter reads mass directly. Use these units for high-accuracy batching of adhesives, syrups, solvents, and even liquids with tiny gas bubbles. The meter body is available from DN15 to DN80 for small and mid-size batch lines.

High-Accuracy Batching for Food, Chemical, and Paint Lines

Here is the thing about batching accuracy. The meter alone cannot fix slow valve delay or poor pipe drainage. But the core sensor has to deliver repeatable mass flow. Silver Instruments supplies Coriolis meter units with 4-20 mA HART output and pulse output for fast cut-off. This matches PLC batching logic without extra signal converters.

In one dairy project in Indonesia, the user ran flavored syrup at 1200 kg/h. The batch target was 250 kg per vessel. The Coriolis meter held repeatability within 0.05% on the mass total. The operator saw stable batch times after the second day.

Parameters We Ask Before Quoting

To specify the right Coriolis meter unit, send us your pressure in bar, temperature in °C, pipe size in DN, and flow range in kg/h. We also need fluid type, viscosity in cP, and whether the unit goes into a safe area or ATEX Zone 1.

For most batching loops we recommend a remote transmitter. This keeps the sensor compact on the skid. PT100 temperature input is built in, so the meter reports density and temperature along with mass flow.

Installation Notes That Prevent Bad Batches

Mount the sensor in a location with full pipe flow. Avoid long vertical drops after the meter if the line drains. Use a small back pressure valve after the sensor on low-pressure applications. This step stops flashing and keeps the batch total from overshooting.

We have seen a water and wastewater contractor in the Philippines install the meter directly above a pump. The vibration from the pump caused noisy output. After adding a pipe support and moving the meter 10 pipe diameters downstream, the batch total returned to normal. These site details often matter more than the transmitter settings.

Why Silver Automation Instruments for Coriolis Meter Units

We stock and support Coriolis meter units for Southeast Asia, Oceania, Latin America, Africa, and the Middle East. Our team works with 10 to 100 person industrial firms and distribu