『Rosemount 8750w Magnetic Flow Meter: Utility Water Service Specs』Related information(flow rotameter|digital flow meter|balo meter|hydraulic flow meter|volumetric meter|positive displacement meter|pitot tube flow meter|displacement meter|cfm meter|variable area flow meter|inline flow meter|differential pressure flow meter|calibrated flow meter|velocity meter|paddle wheel flow meter|oval gear flow meter|anemometer hvac|multiphase flow meter|doppler flow meter|thorpe tube flowmeter|heat flow meter)
Rosemount 8750W Magnetic Flow Meter: Utility Water Service Specs and a Smarter Alternative
Quick Answer: Silver Instruments builds a direct electromechanical replacement for the Rosemount 8750W magnetic flow meter used in utility water lines. Our meter delivers the same 0.5 percent accuracy, a 4-20 mA HART output, and flange sizes from DN25 to DN2000. You get the meter within 3 weeks across Southeast Asia, Oceania, Africa, the Middle East, and Latin America at 30 to 40 percent below OEM cost.
Rosemount 8750W Technical Profile in Water Networks
Water treatment plants and pumping stations rely on the Rosemount 8750W for clean raw water, filtered water, and potable water distribution. The flow tube uses a PTFE or hard rubber liner with electrodes in 316L stainless steel or Hastelloy C. Standard accuracy is 0.5 percent of rate from 0.3 to 12 m/s flow velocity. The transmitter sends a 4-20 mA analog signal with HART digital protocol and a scalable pulse output for totalization. Most municipal projects specify line sizes from DN80 up to DN800, with working pressures of PN16 or PN25. The meter requires a minimum conductivity of 20 µS/cm, which surface water and groundwater sources easily reach. In practice, these meters run for years with negligible drift because the lined flow tube has no moving parts.
Common Supply Challenges with the OEM Meter
Here is the problem many water authorities face. When the electronics fail or the liner cracks after a decade of service, the factory replacement price often exceeds half the original project cost. Lead times stretch to 10 weeks or more from the Americas to a water distribution hub in Nairobi or a desalination plant in Lima. A direct equivalent that shares the same face-to-face dimension, flange standard, and communication protocol becomes the practical answer. Silver Instruments builds magnetic flow meters with identical hardware interfaces so the site does not need to modify pipe spools or control system logic.
How Silver Instruments Matches the Utility Water Specification
Our electromagnetic flow meter for water utility service uses an abrasion-resistant liner. You can choose hard rubber for untreated water or PTFE for drinking water networks that require strict hygiene. Electrode material options include 316L, Hastelloy B, and titanium, covering the same chemical compatibility range as the Rosemount 8750W. The transmitter enclosure is IP67 rated, with IP68 versions for flooded vaults. Every unit leaves our Nanjing calibration bench with a 0.5 percent accuracy certificate and supports HART 7, Modbus RS485, and pulse output. Pipe sizes cover DN15 to DN2000. A customer in Thailand replaced four aging Rosemount 8750W meters on their raw water intake lines. They used our DN500 hard rubber lined sensors, kept the existing flange bolts, and integrated the 4-20 mA HART signal directly into the SCADA. They reported the same flow measurement st
Price and Delivery When You Switch
Cost matters in utility budgets. We price our magmeters for water service about 35 percent below the Rosemount OEM tag. The exact quote depends on the line size, pressure rating, and approval certificates you need like WRAS or NSF. We keep standard DN100 to DN600 flow tubes in our regional warehouse stock, so we can air-freight to Dubai, Lagos, or Manila within 3 weeks. Special coatings and custom liner thicknesses add a short lead time. To get a firm quote, send us your pipe size (DN), flow range in m3/h, water pressure (bar), temperature in degrees Celsius, and the process connection standard. Your email to [email protected] goes straight to an application engineer who cross-checks the dimensional drawing before quoting.
Frequently Asked Questions
Can your meter fit the exact pipe length of a Rosemount 8750W installation?
Yes. We follow ISO 13359 for standard face-to-face dimensions. If you provide the tag number, we verify the length and send a dimensional drawing for approval before production.
What liner is best for potable water distribution?
PTFE lining is the preferred choice for drinking water. Silver Instruments supplies PTFE liners with NSF/ANSI 61 certification for safety. Hard rubber also works if your water is chlorinated at standard municipal levels.
Does the meter support 4-20 mA HART and pulse output simultaneously?
Absolutely. The transmitter provides one isolated 4-20 mA active or passive output with HART 7, plus a dedicated pulse or frequency output. You can also add RS-485 Modbus RTU for SCADA integration.
How long does a replacement meter last in raw water service?
With a hard rubber liner and 316L electrodes, our meters often exceed 10 years in raw water with suspended solids. We have units running at a water supply board in Sri Lanka that were installed in 2015 and still measure within 0.5 percent accuracy.
Can we test your meter with water conductivity below 20 µS/cm?
The standard excitation circuit handles liquids down to 20 µS/cm. For ultrapure water or demineralized water below that threshold, we offer a high-frequency excitation option. Mention your exact conductivity when you request the quote.
Start Your Utility Water Meter Quote
Send the details of your current Rosemount 8750W tag or the required process specs to [email protected]. Our phone number is +86-135-1213-1526. You can also reach us on WhatsApp at 86-135-12131526 or via WeChat +86 13512131526. Include your project location and we will add the freight cost in the quotation. A simple email with your pipe size, flow range, and water pressure lets us return a precise price within one business day.
Hot Product
Related AD
